Jeepaholics Anonymous had the opportunity to see this BRAND NEW product live and in person this past weekend.  The new axle offers obvious clearance advantages over the old one, and we can only assume the high-level of quality product offered by Dynatrac axles will be repeated with this all-new Pro Rock 60!

A set of these axles went through a multiple roll recently on a TJ and appear to have no damage.  They were then driven 3-hours to get home afterwards!  The pictures you see are from after the roll.

The new axle will replace the shaved version Dynatrac has been offering.  The full-size housing will still also be available through Dynatrac if you so desire to purchase it, however, cost differences between the two are rumored to be minimal if any.

PRESS RELEASE:
18 March 2002, Huntington Beach, CA -- Dynatrac Products Inc., the leading provider of performance axle assemblies and components, announced today the Pro Rock 60, a revolutionary, high-clearance, high-pinion axle housing. Designed especially for rockcrawlers and other hardcore 4x4 drivers, the Pro Rock 60 offers unprecedented clearance and strength from a drive axle employing standard Dana 60 components. The Pro Rock 60 offers 30% greater clearance than a standard 60, including a massive reduction in the total outside volume of the pumpkin below the axle centerline. Compared to the venerable Dana 44, the Pro Rock 60 offers increased ground clearance with enormous gains in strength.

Further performance enhancements include a 40% increase in strength over a stock Dana 60, preserving proper gear mesh under heavy torque load. For unmatched cooling and lubrication, the Pro Rock 60 uses Dynatrac exclusive Dual Sump-High Volume™ (DSHV) oil flow system. Axle builders looking for custom suspension attachment points benefit from the Pro Rock’s optional Suspension Mounting Deck.

By employing a unique design approach, proprietary materials and manufacturing techniques, the Dynatrac Pro Rock 60 pumpkin is not only the highest clearance Dana 60, but also the strongest. Cast from 100% high strength nodular iron, Dynatrac’s superior grade of materials maintains the highest level of toughness and resiliency under extreme duress. Dynatrac also heat-treats its pumpkins for the greatest possible strength.

Dynatrac's Pro Rock 60 is constructed of the highest quality, American-made materials and employs an off-the-shelf Dana 60 ring and pinion gear, bearing and seals and requires absolutely no trimming of the ring gear.

Available to the public immediately, the Pro Rock 60 costs $995.00. The optional Suspension Mounting Deck is priced at $59. Dynatrac offers a written, 12-month warranty on axle assemblies.

For more information, contact sales@dynatrac.com